Evapoler 180 H Down

  1. Factory Cooler comes with corded Controller with touch screen Functions & Remote controlled.
  2. Factory Cooler High-efficiency Honey Comb Cooling Pads with higher saturation levels.
  3. 10 adjustable fan speed.
  4. Factory Cooler has a Non-clogging type water distributor for uniform water distribution over pads.
  5. 100% copper wounded electric motor for durability and Aluminium casing to ensure fast heat dissipation.
  6. Unique design of blades offers maximum air flow & minimum noise. factory Coolers are Made of electroplated, rust-free metal and heavy-duty industrial polypropylene.
  7. Submersible type water pump for continuous water supply.
  8. Factory coolers have Pre-dust filters to ensure dust free  air and to prolongs the life of pads.
  9. Water Level sensor to protect the pump in case of low water levels.
  10. Auto clean drain valve to ensure water draining at set regular intervals to prevent scale formation and algae growth.
  11. Float valve to ensure continuous water supply and maintain set water level.
  12. UV-Stabilised weather resistant and high strength polymer casing for longer life.

Description

As a cooling system for a factory, evaporative coolers can drop the air temperature by up to 20 degrees. For cooling a factory floor, Ductable air cooling systems are energy efficient and environmentally friendly.

In Dry climate and low humidity (below 60%) zones ,evaporative coolers have the added advantage of putting moisture into the air as well as cooling the factories.

Portable Cooling models can be effective for spot cooling in areas of the factory that get especially hot .These may be molten metal pouring areas,injection moulding areas or places radiating heat from furnances.

While a more technical approach to cooling a factory may be necessary — and it will depend on the setup of the building — it might begin by opening doors and windows to improve air circulation. Opening windows higher on the walls or near the ceiling will allow hot air to escape and can help lower the factory temperature.

Specifications

Specs/ModelSingle Phase3-Phase
Airflow (m³/h)1800018000
Pressure (pa)190194
Output (Kw)1.11.1
V/Hz220/50380/50
Rated Currency (A)5.62.0
Fan TypeAxialAxial
Fan SpeedsSingle-phase various speed3-phase,2-speed
Noise (dBA)≤76≤76
Dimension L×W×H (mm)1150*1150*9501150*1150*950
Vent size (LxW) mm650*650650*650
Net Weight (kg)8080
Operating Weight (kg)110110
Auto CleaningYesYes
Low Water ProtectionYesYes
Water Capacity (L)3030

Overview

  1. Lid
  2. Water distributor
  3. Cooling pad
  4. Post
  5. Circulation pump
  6. Built-in upper hose
  7. Drain valve
  8. Water inlet valve
  9. Main control box
  10. Fan motor
  11. Venturi
  12. Water probe
  13. Fan
  14. Anti-return air damper
Water distributor
smart
Group

Smart Hub for Group Control. At most 40 units can be controlled with one single display controller.

Installation

RESTAURANT
evapoler