IDECool 25

Features & Benefits

  1. Lesser air quantity required compared to single stage air-coolers for cooling an equivalent area
  2. Considerably lesser moisture addition leading to enhanced comfort levels
  3. Inverter-based technology for optimal power consumption
  4. Optimal capital and operating expenditure
  5. Robust yet friendly design for easy operation and maintenance
  6. Reduction in ducting quantity leading to lower project cost
  7. Better filtration
  8. Wired remote control
  9. Blow through design
  10. Corrosion free and leak proof blower


IDECool 15

Technical specifications

Description IDECool 25
Type Blow through design
AHU box construction 25 mm thick double skin puff panels with extruded aluminium hollow profiles for structural support
Type of blower Backward curve DIDW, dynamically balanced
Make Nicotra
Air flow machine outlet – in CFM/CMH 25000/42500
Make of motor CG/Rotomotive
Blower motor specifications IE2, TEFC 4P, Class F insulation, S1 continuous duty, IP55 protection
Type of drive V-belt drive 2SPB
Make of sensible heat exchanger HMX-DAMA
Material of adiabatic heat exchanger/make Treated and impregnated special cellulose material of 100 mm thick, Eco cool/equivalent
Type/size of filters Panel filter of 90% efficiency down to 10 microns/610 x 610 x 50
Number of filters 16
Recirculating pumps 2 submersible, 260 W single phase pumps
Air inlet louvers Pre-punched louvers made of GI precoated sheets
Dimensions W x D x H (mm) 2850 x 4500 x 2800
Starter panel (outdoor type) Body mounted starter panel with all ON/OFF/trip indications; it will work both in upto and manual mode
Remote control box Remote box with 30 m cable length, with ON/OFF switch and indications for low water level, blower, and pump trip
Total power consumption in kW 13.2
Connected load in kW 17