How Indirect Evaporative System Stands Out from Other Cooling System?

November 27, 2020
admin
Indirect-Evaporative-cooling-system

The demand for indirect evaporative cooling systems has grown quite significantly in the last few years. If you are thinking about getting the right cooling system for your workspace then you have certainly landed yourself on the right page. We are here to discuss different types of evaporative coolers and what can be the best match for your property.

What Are Evaporative Coolers?

When it comes to evaporative cooling systems, they are also acknowledged with the name of Desert coolers and are available in different types. So, you need to research well and understand which types of evaporative cooling systems will fit your space. From an indirect evaporative cooling system to direct Evaporative systems, you need to understand the process of their mechanism and then decide which system will help you with the best result.

The evaporative coolers are a perfect option for the places where the humidity is very low and the ambient temperature is high. All these aspects help the system to provide cool air for breathing and comfort working. Higher the temperature ,better the cooling efficiency.

Take a look at the Indirect Direct evaporative Cooling system . It involves tow stages of cooling -Indirect Evporative Cooling and Direct Evaporative Cooling:

FIRST STAGE : INDIRECT COOLING

As depicted below in the schematic diagram, the indirect stage cools the outdoor air without adding moisture. This cooling is typically achieved using one of two methods. In one method a cooling tower may be used to provide naturally cooled water to a cooling coil in the AHU. In another method a plate type heat exchanger may be used in first stage of cooling. The incoming ambient air is cooled using a cross-flow heat exchanger .

It lowers down both Dry bulb temperature and wet bulb temperature of incoming air without use of any compressors.

INDIRECT-COOLING

2ND stage – DIRECT COOLING

The same air stream passes through a water- saturated honey comb pad (evaporative media) where additional cooling takes place.However,This increases the humidity level of air. This evaporative media is designed to be 90 percent efficient.. Since in indirect mode the air stream has already been cooled without adding moisture.Therefore, the air after stage-2 has a lower humidity than it would have using only a direct evaporative process.

The psychrometric chart below shows the indirect direct evaporative cooling (IDEC) process:

indirect-direct-evaporative-cooling-system-evapoler

Why Indirect Evaporative Cooling System?

The demand for indirect evaporative cooling systems is getting higher with every passing day. The reason being the way it operates. It brings in a number of advantages with itself and helps one avail complete value for money.

Take a look at the advantages of indirect evaporative cooling systems:

  • With the help of this technology, the electricity will get down so will the expenses related to it.
  • It gives better cooling than direct evaporative cooling and that too with low humidity.
  • You will be benefited from completely fresh air. This means there will be no recirculated air to get your health down.
  • This technology is not using any kind of harmful refrigerants and is following the eco-friendly mechanism to help you breathe easy.

So, these are the benefits of Indirect evaporative cooling systems and this is what separates it from others. All you have to do is to look for a reliable indirect evaporative cooler manufacturer and supplier like Evapoler to help you have it installed. Connect now and get your indirect evaporative cooling system installed at very nominal rates and as per your business needs!

Connecting With The Best of Indirect Evaporative Cooler Manufacturer

November 27, 2020
admin
indirect-evaporative-cooler-manufacturer

Are you looking to revamp the cooling system of your business space? The best way to do so is by getting an indirect evaporative cooling system installed. You must look for the best indirect evaporative cooler manufacturer and supplier in the market to help you with it. All you have to do is to research well and connect with the best name in the business and make your purchase successful. Connecting with the right manufacturer is very important, so you must look for it by checking with the aspects like experience, reviews, portfolio, and features.

It will help you have the right indirect evaporative cooling system installed according to your business space. The experts will understand each and every aspect related to the space available and assist you get your indirect cooling system installed according to your needs.

A Bit About Indirect Evaporative Cooling System

When it comes to the Indirect cooling system, it is a perfect option for you to consider and get your cooling facilities completely revamped. It brings a wide range of options to beat the heat and that too without cutting loose on your pockets. Following eco-friendly techniques it gives you the best result that will help you breathe healthy air and exclusively deliver quality work.

All you have to do is to connect yourself with the best manufacturer or supplier in the business to help yourself with the best system that will perfectly match your business space. The experts will be there at your place and understand the kind of cooling system that will fit it. So, you can be certain that the evaporative cooling system will help your business get the results it is looking forward to indirectly.

What Makes You Go For Indirect Evaporative Coolers?

If you are thinking why you must consider installing indirect evaporative coolers then there are a number of reasons behind it. With the assistance of an indirect evaporative cooling system, you will be saving more than 90 percent of electricity expenses. Not only this, but your entire office space will be filled with pure and breathable air. So, the chances of your employee facing health related issues will be quite minimal.

How To Connect With The Best Evaporative Cooling System Manufacturer?

There are a number of companies who are known for providing indirect evaporative cooling systems. It is important that you find the right company to help you with your needs of cooling systems. There are a number of aspects that you need to check and they are :

Background: You must always check with the profile of the company before making your decision. You can check with the background of the respective company by going through the website. You must always connect with a reputed name in the business to get the best evaporative cooling system installed in your office.

Checking With The Portfolio: You must go through the portfolio and check with the sectors they have served already with their evaporative cooling system installation. It will help you make your decision with a lot more clarity.

Going through the Reviews: Lastly, you must check with the reviews while looking for indirect evaporative cooling system manufacturers and suppliers. It will give you complete understanding of how good the products and services are of the respective company and then provide the services accordingly.

Following these steps will help you connect with the best name in the business and avail the best of service while looking for indirect evaporative cooling system installation services. Evapoler is one of the best companies in the business known for providing indirect evaporative cooling systems. So, you can reach out to them and have your needs covered to perfection.

Why are the industrial coolers an effective way of cooling in factories?

November 12, 2020
admin
industrial coolers an effective way of cooling in factories

With the rise in global warming ,the climatic temperature is inching up year on year basis. The temperature on Factory floors becomes unbearble in summer days and effects the worker morale and work efficiency. The industrial coolers can be a great aid to get relief from summer heat.. The need for cooler is higher specially in production units , warehouse, factories, thermal plants, chemical units and many more to provide a comfortable working environment. The hot and humid environment creates inefficiency in work and decreases productivity .So, the ultimate solution to remove this problem is installing a cooler in the factory to re-energize the employees.

Why is it important to have a cooler in every industry?
Well the question has already been answered above, but let’s go in detail to know about its single contribution to the factory.

1. No CFC emission

The great thing about setting a cooler in a factory is that it does not release CFC. So we can consider it as an environment friendly technology based equipment that creates no harmful gas for the employees. Without any poisonous gas, the cooler aids in cooling and maintaining the air temperature with the help of the industrial cooling fan. This cooler can cover a space of 2500 sq. ft. with 18000 CMH big air flow. It has a powerful 30 inches Axial fan. So, it is the safest way to keep a factory cool and let the employees work with efficiency in a hygienic and comfortable atmosphere.

2. Low electric consumption

The reason behind its demand and publicity in the market is, this cooler consumes very less electricity. So it is perfect to use for commercial and industrial purposes. As we all know, production units need lot of electric energy for various operations. In such a scenario a cooler with low power consumption can help to reduce overall electric expense.

3. Faster cooling within short period of time

This cooler releases cold air within minutes of switching on that does not waste time of the employees. It never let the employees feel fatigue during work. Employees are inspired to work hard and put more effort as the environment is the best suitable to perform well. Working become a pleasure in such an atmosphere where employees feel fresh all the time and as a result it boosts on productivity.

Combining these above three features, Evapoler has introduced the exclusive Industrial Portable Model WK-180 KB that is playing a vital role in the factories. It has suitable indoor and outdoor applications, heavy duty castor wheels for easy mobility, honeycomb cooling pads and many more other features. The users of this cooler are highly satisfied with its functions.